1、到VMware官網上下載安裝包，注冊免費Licensing
https://www.vmware.com/
http://register.vmware.com/content/download-107.html
VMware Server 2 for Linux AAM0N-FF00U-U9HC2-42194
VMware Server 2 for Windows A2084-F6J0Y-VAJF0-40NV4
VMware Server1.07的rpm包下載地址：http://download3.vmware.com/software/vmserver/VMware-server-1.0.7-108231.i386.rpm
貌似Server2.0不能下載……
2、安裝必須的包：
gcc gcc-c++
kernel kernel-devel kernel-headers
libXtst-devel libXrender-devel xinetd
yum install -y kernel-headers libXtst-devel libXrender-devel xinetd
3、安裝VMware Server：
rpm -ivh VMware-server-1.0.7-108231.i386.rpm
安裝完成以后運行配置腳本進行配置：
/usr/bin/vmware-config.pl
一路順下去
1)閱讀協議yes
2)In which directory do you want to install the mime type icons?
[/usr/share/icons]
3)What directory contains your desktop menu entry files? These files have a
.desktop file extension. [/usr/share/applications]
4)In which directory do you want to install the application's icon?
[/usr/share/pixmaps]
5)Trying to find a suitable vmmon module for your running kernel.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes]
6)Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel? [/lib/modules/2.6.18-92.el5PAE/build/include]
7)The module loads perfectly in the running kernel.
Do you want networking for your virtual machines? (yes/no/help) [yes]
8)Configuring a bridged network for vmnet0.
Your computer has multiple ethernet network interfaces available: eth0, eth1. Which one do you want to bridge to vmnet0? [eth0]
9)The following bridged networks have been defined:
. vmnet0 is bridged to eth0
Do you wish to configure another bridged network? (yes/no) [no]
10)Do you want to be able to use NAT networking in your virtual machines? (yes/no)[yes]
11)Configuring a NAT network for vmnet8.
Do you want this program to probe for an unused private subnet? (yes/no/help) [yes]
12)Probing for an unused private subnet (this can take some time)...
The subnet 172.16.134.0/255.255.255.0 appears to be unused.
The following NAT networks have been defined:
. vmnet8 is a NAT network on private subnet 172.16.134.0.
Do you wish to configure another NAT network? (yes/no) [no]
13)Do you want to be able to use host-only networking in your virtual machines? [yes]
14)Configuring a host-only network for vmnet1.
Do you want this program to probe for an unused private subnet? (yes/no/help) [yes]
15)Probing for an unused private subnet (this can take some time)...
The subnet 192.168.155.0/255.255.255.0 appears to be unused.
The following host-only networks have been defined:
. vmnet1 is a host-only network on private subnet 192.168.155.0.
Do you wish to configure another host-only network? (yes/no) [no]
16)The module loads perfectly in the running kernel.
The default port : 902 is not free. We have selected a suitable alternative port for VMware Server use. You may override this value now.Remember to use this port when connecting to this server.Please specify a port for remote console connections to use [904]
17)In which directory do you want to keep your virtual machine files?
[/var/lib/vmware/Virtual Machines]
18)The path "/var/lib/vmware/Virtual Machines" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes]
19)Please enter your 20-character serial number.
Type XXXXX-XXXXX-XXXXX-XXXXX or 'Enter' to cancel: AAM0N-FF00U-U9HC2-42194
安裝完成。
4、安裝完成了以后（不知道用不用運行vmware命令）就可以直接用VMware Server Console去連了：
主意的是，此處需要在IP后加上端口904，如：
10.168.1.114:904
就可以正常操作了。
