激情久久久_欧美视频区_成人av免费_不卡视频一二三区_欧美精品在欧美一区二区少妇_欧美一区二区三区的

服務器之家：專注于服務器技術及軟件下載分享
分類導航

PHP教程|ASP.NET教程|Java教程|ASP教程|編程技術|正則表達式|C/C++|IOS|C#|Swift|Android|VB|R語言|JavaScript|易語言|vb.net|

服務器之家 - 編程語言 - PHP教程 - Yii2結合Workerman的websocket示例詳解

Yii2結合Workerman的websocket示例詳解

2019-09-07 15:46Gowhich PHP教程

這篇文章主要給大家介紹了關于Yii2結合Workerman的websocket的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面來一起學習學習吧

前言

本文主要給大家介紹了關于Yii2結合Workerman的websocket的相關內容，兩者都是好東西，我就想著能不能結合起來，這樣Yii2出現瓶頸的時候有些業務就可以平滑地遷移到Workerman中。下面話不多說了，來隨著小編來一起看看詳細的介紹吧

步驟如下

1、安裝workerman

composer require workerman/workerman

2、啟動workerman

創建commands/WorkermanWebSocketController.php文件

創建actionIndex()函數，用來啟動，代碼如下

public function actionIndex()
{
 if ('start' == $this->send) {
 try {
  $this->start($this->daemon);
 } catch (\Exception $e) {
  $this->stderr($e->getMessage() . "\n", Console::FG_RED);
 }
 } else if ('stop' == $this->send) {
 $this->stop();
 } else if ('restart' == $this->send) {
 $this->restart();
 } else if ('reload' == $this->send) {
 $this->reload();
 } else if ('status' == $this->send) {
 $this->status();
 } else if ('connections' == $this->send) {
 $this->connections();
 }
}

添加初始化模塊

public function initWorker()
{
 $ip = isset($this->config['ip']) ? $this->config['ip'] : $this->ip;
 $port = isset($this->config['port']) ? $this->config['port'] : $this->port;
 $wsWorker = new Worker("websocket://{$ip}:{$port}");

 // 4 processes
 $wsWorker->count = 4;

 // Emitted when new connection come
 $wsWorker->onConnect = function ($connection) {
 echo "New connection\n";
 };

 // Emitted when data received
 $wsWorker->onMessage = function ($connection, $data) {
 // Send hello $data
 $connection->send('hello ' . $data);
 };

 // Emitted when connection closed
 $wsWorker->onClose = function ($connection) {
 echo "Connection closed\n";
 };
}

添加啟動模塊

/**
 * workman websocket start
 */
public function start()
{
 $this->initWorker();
 // 重置參數以匹配Worker
 global $argv;
 $argv[0] = $argv[1];
 $argv[1] = 'start';
 if ($this->daemon) {
 $argv[2] = '-d';
 }

 // Run worker
 Worker::runAll();
}

添加停止模塊

/**
 * workman websocket stop
 */
public function stop()
{
 $this->initWorker();
 // 重置參數以匹配Worker
 global $argv;
 $argv[0] = $argv[1];
 $argv[1] = 'stop';
 if ($this->gracefully) {
 $argv[2] = '-g';
 }

 // Run worker
 Worker::runAll();
}

添加重啟模塊

 
/**
 * workman websocket restart
 */
public function restart()
{
 $this->initWorker();
 // 重置參數以匹配Worker
 global $argv;
 $argv[0] = $argv[1];
 $argv[1] = 'restart';
 if ($this->daemon) {
 $argv[2] = '-d';
 }

 if ($this->gracefully) {
 $argv[2] = '-g';
 }

 // Run worker
 Worker::runAll();
}

添加重載模塊

/**
 * workman websocket reload
 */
public function reload()
{
 $this->initWorker();
 // 重置參數以匹配Worker
 global $argv;
 $argv[0] = $argv[1];
 $argv[1] = 'reload';
 if ($this->gracefully) {
 $argv[2] = '-g';
 }

 // Run worker
 Worker::runAll();
}

添加狀態模塊

/**
 * workman websocket status
 */
public function status()
{
 $this->initWorker();
 // 重置參數以匹配Worker
 global $argv;
 $argv[0] = $argv[1];
 $argv[1] = 'status';
 if ($this->daemon) {
 $argv[2] = '-d';
 }

 // Run worker
 Worker::runAll();
}

添加鏈接數模塊

/**
 * workman websocket connections
 */
public function connections()
{
 $this->initWorker();
 // 重置參數以匹配Worker
 global $argv;
 $argv[0] = $argv[1];
 $argv[1] = 'connections';

 // Run worker
 Worker::runAll();
}

3、前端調用

<script>
 // Create WebSocket connection.
 const ws = new WebSocket('ws://{{ app.request.hostName }}:2347/'); // 這里是獲取的網站的域名，測試的時候可以改為自己的本地的ip地址

 // Connection opened
 ws.addEventListener('open', function (event) {
 ws.send('Hello Server!');
 });

 // Listen for messages
 ws.addEventListener('message', function (event) {
 console.log('Message from server ', event.data);
 });

 setTimeout(function() {
 ws.send('ssssss');
 }, 10000);

</script>

4、config參數配置

修改console.php并添加如下代碼

'controllerMap' => [
 'workerman-web-socket' => [
 'class' => 'app\commands\WorkermanWebSocketController',
 'config' => [
  'ip' => '127.0.0.1',
  'port' => '2346',
  'daemonize' => true,
 ],
 ],
],

5、nginx配置

為什么會用 nginx， 我們正常部署上線是不可能直接使用ip的，這個戶存在安全隱患，最好是綁定一個域名

server {
 charset utf-8;
 client_max_body_size 128M;

 listen 2347;

 server_name www.gowhich.com; # 這里改為自己的域名

 access_log /xxx.workerman.access.log; # 換成自己服務器的nginx日志路徑
 error_log /xxx.workerman.error.log; # 換成自己服務器的nginx日志路徑

 location / {
 proxy_pass http://127.0.0.1:2346; # 代理2346 也可以根據項目配置為自己的端口

 proxy_set_header X-Real-IP $remote_addr;
 proxy_set_header Host $host;
 proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

 proxy_http_version 1.1;
 proxy_set_header Upgrade $http_upgrade;
 proxy_set_header Connection "upgrade";
 }
}

重新nginx

nginx -s relad 或者 sudo nginx -s reload

然后將第3步的代碼加入自己做的視圖中，如果沒有問題的話，websocket啟動后就能正常通訊了。

6、啟動workerman websocket

// 啟動
./yii workerman-web-socket -s start -d

如果沒有問題的話會得到類似如下的結果

$ ./yii workerman-web-socket -s start -d
Workerman[workerman-web-socket] start in DAEMON mode
----------------------- WORKERMAN -----------------------------
Workerman version:3.5.13   PHP version:7.1.16
------------------------ WORKERS -------------------------------
user   worker  listen      processes status
durban  none   websocket://127.0.0.1:2346 4   [OK] 
----------------------------------------------------------------
Input "php workerman-web-socket stop" to stop. Start success.

7、其他

commands/WorkermanWebSocketController.php 完整代碼如下

<?php
/**
 * WorkmanWebSocket 服務相關
 */

namespace app\commands;

use Workerman\Worker;
use yii\console\Controller;
use yii\helpers\Console;

/**
 *
 * WorkermanWebSocket
 *
 * @author durban.zhang <durban.zhang@gmail.com>
 */

class WorkermanWebSocketController extends Controller
{
 public $send;
 public $daemon;
 public $gracefully;

 // 這里不需要設置，會讀取配置文件中的配置
 public $config = [];
 private $ip = '127.0.0.1';
 private $port = '2346';

 public function options($actionID)
 {
  return ['send', 'daemon', 'gracefully'];
 }

 public function optionAliases()
 {
  return [
   's' => 'send',
   'd' => 'daemon',
   'g' => 'gracefully',
  ];
 }

 public function actionIndex()
 {
  if ('start' == $this->send) {
   try {
    $this->start($this->daemon);
   } catch (\Exception $e) {
    $this->stderr($e->getMessage() . "\n", Console::FG_RED);
   }
  } else if ('stop' == $this->send) {
   $this->stop();
  } else if ('restart' == $this->send) {
   $this->restart();
  } else if ('reload' == $this->send) {
   $this->reload();
  } else if ('status' == $this->send) {
   $this->status();
  } else if ('connections' == $this->send) {
   $this->connections();
  }
 }

 public function initWorker()
 {
  $ip = isset($this->config['ip']) ? $this->config['ip'] : $this->ip;
  $port = isset($this->config['port']) ? $this->config['port'] : $this->port;
  $wsWorker = new Worker("websocket://{$ip}:{$port}");

  // 4 processes
  $wsWorker->count = 4;

  // Emitted when new connection come
  $wsWorker->onConnect = function ($connection) {
   echo "New connection\n";
  };

  // Emitted when data received
  $wsWorker->onMessage = function ($connection, $data) {
   // Send hello $data
   $connection->send('dddd hello ' . $data);
  };

  // Emitted when connection closed
  $wsWorker->onClose = function ($connection) {
   echo "Connection closed\n";
  };
 }

 /**
  * workman websocket start
  */
 public function start()
 {
  $this->initWorker();
  // 重置參數以匹配Worker
  global $argv;
  $argv[0] = $argv[1];
  $argv[1] = 'start';
  if ($this->daemon) {
   $argv[2] = '-d';
  }

  // Run worker
  Worker::runAll();
 }

 /**
  * workman websocket restart
  */
 public function restart()
 {
  $this->initWorker();
  // 重置參數以匹配Worker
  global $argv;
  $argv[0] = $argv[1];
  $argv[1] = 'restart';
  if ($this->daemon) {
   $argv[2] = '-d';
  }

  if ($this->gracefully) {
   $argv[2] = '-g';
  }

  // Run worker
  Worker::runAll();
 }

 /**
  * workman websocket stop
  */
 public function stop()
 {
  $this->initWorker();
  // 重置參數以匹配Worker
  global $argv;
  $argv[0] = $argv[1];
  $argv[1] = 'stop';
  if ($this->gracefully) {
   $argv[2] = '-g';
  }

  // Run worker
  Worker::runAll();
 }

 /**
  * workman websocket reload
  */
 public function reload()
 {
  $this->initWorker();
  // 重置參數以匹配Worker
  global $argv;
  $argv[0] = $argv[1];
  $argv[1] = 'reload';
  if ($this->gracefully) {
   $argv[2] = '-g';
  }

  // Run worker
  Worker::runAll();
 }

 /**
  * workman websocket status
  */
 public function status()
 {
  $this->initWorker();
  // 重置參數以匹配Worker
  global $argv;
  $argv[0] = $argv[1];
  $argv[1] = 'status';
  if ($this->daemon) {
   $argv[2] = '-d';
  }

  // Run worker
  Worker::runAll();
 }

 /**
  * workman websocket connections
  */
 public function connections()
 {
  $this->initWorker();
  // 重置參數以匹配Worker
  global $argv;
  $argv[0] = $argv[1];
  $argv[1] = 'connections';

  // Run worker
  Worker::runAll();
 }
}

workerman websocket支持的其他命令

重啟

$ ./yii workerman-web-socket -s restart -d
Workerman[workerman-web-socket] restart 
Workerman[workerman-web-socket] is stopping ...
Workerman[workerman-web-socket] stop success
----------------------- WORKERMAN -----------------------------
Workerman version:3.5.13   PHP version:7.1.16
------------------------ WORKERS -------------------------------
user   worker  listen      processes status
durban  none   websocket://127.0.0.1:2346 4   [OK] 
----------------------------------------------------------------
Input "php workerman-web-socket stop" to stop. Start success.

重載

$ ./yii workerman-web-socket -s reload 
Workerman[workerman-web-socket] reload

狀態

$ ./yii workerman-web-socket -s status -g
Workerman[workerman-web-socket] status 
----------------------------------------------GLOBAL STATUS----------------------------------------------------
Workerman version:3.5.13   PHP version:7.1.16
start time:2018-09-10 11:22:15 run 0 days 0 hours 
load average: 1.79, 2, 2   event-loop:\Workerman\Events\Swoole
1 workers  4 processes
worker_name exit_status  exit_count
none   0    12
----------------------------------------------PROCESS STATUS---------------------------------------------------
pid memory listening     worker_name connections send_fail timers total_request qps status
8283 4M  websocket://127.0.0.1:2346 none   0   0   0  0    0  [idle]
8284 4M  websocket://127.0.0.1:2346 none   0   0   0  0    0  [idle]
8285 4M  websocket://127.0.0.1:2346 none   0   0   0  0    0  [idle]
8286 4M  websocket://127.0.0.1:2346 none   0   0   0  0    0  [idle]
----------------------------------------------PROCESS STATUS---------------------------------------------------
Summary 16M  -       -   0   0   0  0    0  [Summary]

連接數

 ./yii workerman-web-socket -s connections
Workerman[workerman-web-socket] connections 
--------------------------------------------------------------------- WORKERMAN CONNECTION STATUS --------------------------------------------------------------------------------
PID  Worker   CID  Trans Protocol  ipv4 ipv6 Recv-Q  Send-Q  Bytes-R  Bytes-W  Status   Local Address   Foreign Address

我這里暫時連接的，所以沒有連接的信息

停止

$ ./yii workerman-web-socket -s stop   
Workerman[workerman-web-socket] stop 
Workerman[workerman-web-socket] is stopping ...
Workerman[workerman-web-socket] stop success

總結

以上就是這篇文章的全部內容了，希望本文的內容對大家的學習或者工作具有一定的參考學習價值，如果有疑問大家可以留言交流，謝謝大家對服務器之家的支持。

延伸 · 閱讀

精彩推薦
Weibo Article 1 Weibo Article 2 Weibo Article 3 Weibo Article 4 Weibo Article 5 Weibo Article 6 Weibo Article 7 Weibo Article 8 Weibo Article 9 Weibo Article 10 Weibo Article 11 Weibo Article 12 Weibo Article 13 Weibo Article 14 Weibo Article 15 Weibo Article 16 Weibo Article 17 Weibo Article 18 Weibo Article 19 Weibo Article 20 Weibo Article 21 Weibo Article 22 Weibo Article 23 Weibo Article 24 Weibo Article 25
主站蜘蛛池模板： www.99热视频| 久久久成人999亚洲区美女 | 亚洲啪 | 精品国产一区二区三区在线观看 | 欧美精品一区二区久久久 | 91资源在线观看 | 久久精品亚洲欧美日韩精品中文字幕 | 福利免费观看 | 一级黄色性感片 | 成人区一区二区 | 噜噜社| 久久精品中文字幕 | 成人免费看视频 | 国产精品久久久久一区二区 | 中国成人在线视频 | 在线中文资源免费 | 777sesese| 久久国产精品网 | 欧美毛片在线观看 | 成人一级片毛片 | 一级片九九 | 欧美日韩视频网站 | 日本aaa一级片 | 中国3xxxx | 久久手机在线视频 | 播色网| 久久国产91 | 久久一区二区三区av | 国产啊v在线观看 | 一级黄色性感片 | 国产一区二区精品免费 | 国产精品久久久久久模特 | 91成人免费网站 | 精品一二三区视频 | 在线播放的av网站 | 国产精品视频久久久 | 黄色视屏免费在线观看 | 欧美一区2区三区4区公司二百 | 国产第一页精品 | 国产亚洲精品久久久久婷婷瑜伽 | 偿还电影免费看 |